detail of drain water catchment

Description

A useful autocad detail of drain water catchment with a 75 mm pipe, the detail is provided in plan and also a cross section.

In the detail you can see the drain water catchment which contains:

- Detail of concrete splash block over the ground level.

- A 75mm pipe inside the masonry wall.

- How the 45 degrees angle gets outside the masonry wall

- The dimensions of the splash block over the ground level


In this dwg detail of the drain water catchment you can see the dimensions of the pipe over the gound level, which must be 15cm. The top level of the splash block is 5cm over the ground level.



File size: 0.53 Mb
File format: dwg

contents

dwg cad detail of water catchment system 

1 comment:

  1. The flourishing packaging industry and the rising adoption of injection-molded packaging merchandise are anticipated to drive the demand for these merchandise in the U.S. over the forecast interval. Compression molding is, in some ways, the opposite of injection molding. The molten plastic is deposited right into a mold, which then closes. There is an inlet hole someplace in the mold through which another device applies stress. The stress forces the plastic outward into the hollow cavity of the Vacuum Seal Storage Bags mold, attaining the final shape.

    ReplyDelete

Powered by Blogger.